EU-Hiboost

Hi10-6S-Pro

Réseaux :5G NR 700, EGSM 900, DCS 1800, 3G 2100, 4G LTE 800 et 2600
Couverture :jusqu'à 1500 mètres carrés
Gain max. :65 dB

Convient pour une petite maison ou un bureau
Léger et élégant
Approuvé CE RED

Le répéteur de signal mobile Hi10-6S-Pro est une solution efficace pour les problèmes de réception dans les petites maisons ou les bureaux jusqu'à 1 500 m². Dites adieu aux appels interrompus et aux débits lents et restez connecté !

Afficher tous les détails

Stay Always Connected

Your struggle with poor reception is over! Hi10-6S-Pro mobile signal amplifier is a perfect signal solution for a small home or office.

Supporting 6 frequency bands at a time, the device delivers faster data speeds, endless streaming and clearer calls. It’s also compatible with all mobile operators in the EU and UK.

* Mind that in order to receive maximum signal inside your home/office, you should pick up at least 2-3 bars outside it. The repeater coverage area also depends on design features of your building.

Set-Up and Monitoring via the Hiboost App

HiBoost signal booster is powered by a free cloud-based HiBoost App, Signal Supervisor. Thanks to it you can control your device directly from your phone or tablet at anytime from anywhere and benefit from much easier and more efficient installation via an online guide.

Go through all intsallation steps via an app and find the best position for the outdoor antenna easily with a professional signal meter tool
Keep informed on booster performance status thanks to push notifications
Share your device with competent tech experts and receive assistance online

Download Signal Supervisor App From Google Play and App Store.

What Standard Kit Includes

HiBoost repeaters go in a full kit ready for installation. Hi10-6S-Pro model’s standard kit includes:

Mobile signal booster
Outdoor directional antenna
50 ft (15.2m) low-loss HiBoost 5D cable
12V/ 4A, AC/DC power supply
Power cord with European standard plug

Automatic Gain Control (AGC)

The booster optimizes its performance according to the outdoor signal strength in your area. If the signal is too strong, the power of signal amplification automatically gets down. This completely avoids interference with your operator’s network and saves the booster from overload.

Self-Oscillation Detection

Self-oscillation can occur when the booster and antenna are installed too close to each other. The booster automatically detects the problem and reduces booster gain to fix the problem.

1. The outdoor antenna picks up the signal from the nearest cell tower and sends it to the booster.

2. The booster amplifies or literally repeats the signal and transmits it to the indoor antenna.

3. The indoor antenna spreads the enhanced the signal throughout the desired area.

4. This is the moment! Your mobile phone receives a strong signal and you enjoy seamless calls and data!

Working Bands 700, 800, 900, 1800, 2100, 2600 MHz
UL Frequency Range 703-733/ 832-862 / 880-915 / 1710-1785 / 1920-1980 / 2500-2570
DL Frequency Range 758-788/ 791-821 / 925-960 / 1805-1880 / 2110-2170 / 2620-2690
Supported Standards NR700, EGSM, WCDMA, DCS, LTE800 and LTE2600
Maximum Gain Uplink 60 dB, Downlink: 65 dB
Max. Output Power Uplink 20 dBm, Downlink: 10 dBm
MGC (Step Attenuation) ≥ 31 db/ 1 db step
Intelligent AGC ALC ≥42dB ISO ≥42dB
Gain Flatness Typical≤5dB (p-p)
Noise Figure @ Max. System Gain Typical≤5dB
V.S.W.R Typical≤2
Group Delay ≤1μs
Frequency Stability ≤0.01ppm
Power Supply Input AC 90~264 V, 50/60 Hz, Output DC 12V/4A
Power Consumption ≤20W
Impedance 50 ohm
I/O port SMA-Female
Dimensions 6.7*10.4*2.1 inch/171*266*55mm
Booster Weight ≤5.5lbs/2.5KG
Booster Kit Weight 2.5KG
Operating Temperature -10ºC~+55ºC
Storage Temperature -10ºC~+80ºC
Relative Humidity 5% – 95%
Barometric Pressure 55 kPa -106 kPa
Environment Condition IP40