1 7

EU-Hiboost

Hi10-4S-Pro

Hi10-4S-Pro

Networks : EGSM 900, DCS 1800, 3G 2100, 4GLTE 800
Coverage : up to 1500 square meters
Max.Gain : 65 dB

  • Suitable for a small home or office
  • Light and stylish
  • CE RED Approved

    The Hi10-4S-Pro mobile signal repeater is an efficient solution for poor reception in a small home or office up to 1500 square meters. Put an end to dropped calls and slow data rates and stay connected!
View full details

Stay Always Connected

Your struggle with poor reception is over! Hi10-4S-Pro mobile signal amplifier is a perfect signal solution for a small home or office.

Supporting 4 frequency bands at a time, the device delivers faster data speeds, endless streaming and clearer calls. It’s also compatible with all mobile operators in the UK and EU. Compliant with Ofcom VTS requirements.

* Mind that in order to receive maximum signal inside your home/office, you should pick up at least 2-3 bars outside it. The repeater coverage area also depends on design features of your building.

Set-Up and Monitoring via the Hiboost App

HiBoost signal booster is powered by a free cloud-based HiBoost App, Signal Supervisor. Thanks to it you can control your device directly from your phone or tablet at anytime from anywhere and benefit from much easier and more efficient installation via an online guide.

  • Go through all intsallation steps via an app and find the best position for the outdoor antenna easily with a professional signal meter tool
  • Keep informed on booster performance status thanks to push notifications
  • Share your device with competent tech experts and receive assistance online

Download Signal Supervisor App From Google Play and App Store.

What Standard Kit Includes

HiBoost repeaters go in a full kit ready for installation. Hi10-4S-Pro model’s standard kit includes:

  •  Mobile signal booster
  •  Outdoor directional antenna
  •  50 ft (15.2m) low-loss HiBoost 5D cable
  •  12V/ 4A, AC/DC power supply

Powerful Network Protection

No worries, all HiBoost signal repeaters are enabled with smart software that guarantees overall network protection even in the hardest signal reception conditions.
Automatic Gain Control (AGC)

The booster optimizes its performance according to the outdoor signal strength in your area. If the signal is too strong, the power of signal amplification automatically gets down. This completely avoids interference with your operator’s network and saves the booster from overload.

Self-Oscillation Detection

Self-oscillation can occur when the booster and antenna are installed too close to each other. The booster automatically detects the problem and reduces booster gain to fix the problem.

Fully Certified Product

Quality proved by the compliance with the international and EU health and safety regulations (CE RED 2014/53/EU, RoHS, ISO 9001:2023)

How It Works

1. The outdoor antenna picks up the signal from the nearest cell tower and sends it to the booster.

2. The booster amplifies or literally repeats the signal and transmits it to the indoor antenna.

3. The indoor antenna spreads the enhanced the signal throughout the desired area.

4. This is the moment! Your mobile phone receives a strong signal and you enjoy seamless calls and data!

Tech Specs

  • Working Bands 800, 900, 1800, 2100 MHz
  • UL Frequency Range 832-862 / 880-915 / 1710-1785 / 1920-1980
  • DL Frequency Range 791-821 / 925-960 / 1805-1880 /2110-2170
  • Supported Standards EGSM, WCDMA, DCS and LTE800
  • Maximum Gain Uplink 60 dB, Downlink: 65 dB
  • Max. Output Power Uplink 20 dBm, Downlink: 10 dBm
  • MGC (Step Attenuation) ≥ 31 db/ 1 db step
  • Intelligent AGC ALC ≥22dB ISO ≥22dB
  • Gain Flatness Typical≤5dB (p-p)
  • Noise Figure @ Max. System Gain Typical≤5dB
  • V.S.W.R Typical≤2
  • Group Delay ≤1μs
  • Frequency Stability ≤0.01ppm
  • Power Supply Input AC 90~264 V, 50/60 Hz, Output DC 12V/4A
  • Power Consumption ≤20W
  • Impedance 50 ohm
  • I/O port SMA-Female
  • Dimensions 6.7*10.4*2.1 inch/171*266*55mm
  • Booster Weight ≤5.5lbs/2.5KG
  • Booster Kit Weight 2.5KG
  • Operating Temperature -10ºC~+55ºC
  • Storage Temperature -10ºC~+80ºC
  • Relative Humidity 5% – 95%
  • Barometric Pressure 55 kPa -106 kPa
  • Environment Condition IP40

Support

Data Downloads
Data Sheet User Manual